Overview
Fill holes and gaps in exterior walls including masonry, concrete and brick. This smooth finish grey filler is water and frost-resistant and drys in 1-2 hours. Designed to be used in damp and moisture-prone conditions. It leaves you with a repaired surface that can be drilled and that will stand up to the exterior elements.
- Frost and moisture resiliant
- Fills gaps up to 20mm deep
- Can be applied in damp conditions
- Weather resisitant
| Area | Exterior |
| Recommended Use | Walls including masonry, concrete and brick |
| Base | Water Based |
| Drying Time | 1-2 hours |
| Re-Coat Time | 1-2 hours |
| Recommended Coats | As required |
| Application Method | Filling knife or similar tool |
| VOC Levels | Minimal |
Preparation
Always ensure the surface to be repaired is clean and free from any dust, dirt and grease that may affect adhesion.
Application
We recommend performing a test to ensure compatibility with the surface to be repaired, always follow the manufacturer's instructions found on the packaging.
- Push the filler firmly into the area to repair, leave the filler slightly raised above the surface.
- Before it dries, smooth off with a wet filling knife.
- Allow the filler to dry for 2 hours before painting.
- If the hole is deeper than 20mm, fill in layers allowing each layer to dry for 1-2 hours before adding another.
